Cable Terminal Protectors for RMU and GIS

Send Inquiry

Request To Call Back

Cable Terminal Protectors for RMU and GIS

Get a Price/Quote

MOQ : 100 Pieces

Cable Terminal Protectors for RMU and GIS Specification

Thermal Conductivity
Low; provides thermal insulation and electrical isolation.

Interface
Fits over existing cable terminals

Usage
Cable Terminal Protectors

Components
Protector body, clamping rings, sealing covers/straps

IP Rating
IP55-IP67 depending on installation

Operating Temperature
-40C to +90C

Features
UV resistant, flame retardant, waterproof sealing, reusable, easy to install, halogen-free

Product Type
Cable Terminal Protectors for RMU and GIS

Application
Cable Terminal Protectors

Rated Voltage
Up to 36 kV

Supply Voltage
Up to 36 kV (compatible with RMU/GIS system ratings)

Size
Standard

Dimension (L*W*H)
Varies by product, typical range 120 mm x 70 mm x 65 mm

Function
Protects and insulates cable terminals in RMU (Ring Main Unit) and GIS (Gas Insulated Switchgear) installations to prevent electrical faults, flashovers, and ingress of moisture or contaminants.

Color
Red

Weight
Approx. 250-500 g (varies by model/size)

Thickness
3-5 mm nominal

Current Rating
Suitable for corresponding MV cable rating (typically up to 630 A)

Capacity
Supports up to 3-core or 1-core cable terminations

Frequency
50/60 Hz system compatible

Recommended Accessories
Sealing kit, identification tags

Moisture Resistance
Highly moisture-proof with secure sealing provision

Surface Finish
Smooth, non-sticky, non-tracking finish

Compliance Standard
Meets IEC 60502, IEC 62271, and IS 13573 standards

Custom Marking
Available as per request

RoHS Compliance
Yes, free from hazardous substances

Weatherability
Excellent resistance to ozone, UV, and outdoor environments

Storage Life
10 years under standard warehouse conditions

Brand Compatibility
Compatible with most leading RMU and GIS switchgear brands

Tensile Strength
>8 MPa

Dielectric Strength
>18 kV/mm

Packing Type
Individual polybag/box or as per requirements

Flame Retardant Class
UL 94 V-0

Installation Method
Tool-free slip-fit or clamp-on design

Material
High-grade insulating polymer (EPDM or silicone rubber blend)

Cable Terminal Protectors for RMU and GIS Trade Information

Minimum Order Quantity
100 Pieces

Supply Ability
5000 Pieces Per Month

Delivery Time
7 Days

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

More Products in Busbar End Cap Category

Heat Shrink Busbar Insulation Sleeve

Minimum Order Quantity : 50

Components : Crosslinked polyolefin

IP Rating : IP67 (when installed correctly)

Usage : Industrial

Thickness : 1mm to 3mm (after recovery)

Rated Voltage : 1kV 36kV

Get a Price/Quote

Heat Shrink Extra Heavy Wall Tube Suitable upto 66 kV

Minimum Order Quantity : 50

Components : Heat shrink tube

IP Rating : IP68 (when properly installed)

Usage : Industrial

Thickness : Extra Heavy Wall (Typically 3.0 mm 6.0 mm before shrinkage)

Rated Voltage : Up to 66 kV

Get a Price/Quote

Silicone Bushing Boot

Minimum Order Quantity : 100 Pieces

Components : Silicone Rubber

IP Rating : IP65

Usage : Industrial

Thickness : 5 mm (approx.)

Rated Voltage : Up to 36 kV

Get a Price/Quote

Silicone Busbar End Cap

Components : High grade silicone

IP Rating : IP54 or higher (depends on fit and application)

Usage : Electrical busbar end cap, insulation cover

Thickness : 25 mm (approximate)

Rated Voltage : Up to 1 kV (Typical)

Get a Price/Quote